(4) MONO/STEREO (FOR MON VERSION ONLY)
Press MON button (4) to select monaural or stereo (Mono reception for radio stations). You can sometimes improve reception of distant stations by selecting mono operation.
(4) SUB-WOOFER (FOR SUB.W. VERSION ONLY)
Press 
SW”.
(5) LOUDNESS
Press LOU button (5) to increase bass output and display will show “LOUD”.
(6) SET THE CLOCK |
|
Press and hold the DSP button (6), then press the +/ | (15) to change minutes or |
/– (14) to change hours. |
|
(7) EJECT |
|
Push a CD into slot. The CD will begin to play. Press | (eject) button (7) to stop CD |
play and eject CD from slot. Receiver switches to radio operation.
(8, 9 & 10) SELECT MODE
Press SEL button (8) to move display through bass, treble, balance, fader and volume functions. Use (9) and (10) buttons to adjust the selected mode. When mode has not been adjusted for several seconds, display returns to normal radio or CD display.
| BAS |
| TRE |
| BAL |
| FAD |
| VOL |
|
| (Bass) |
| (Treble) |
| (Balance) |
| (Fader) |
| (Volume) | |
|
|
|
|
|
|
|
|
|
|
|
Bass
Press SEL button (8) for one time. Adjust bass level using (9) and (10) buttons.
Treble
Press SEL button (8) for two times. Adjust treble level using (9) and (10) buttons.
Balance
Press SEL button (8) for three times. Adjust sound balance between left and right speakers using (9) and (10) buttons.
Fader
Press SEL button (8) for four times. Adjust sound balance between front and rear speakers using (9) and (10) buttons.
Volume
Press SEL button (8) for five times. Adjust volume level using (9) and (10) buttons.
(11) BAND
Press BND button (11) to change between three FM bands and two AM bands and one LW band. Each band stores up to six preset stations.
FM1 
FM2 
FM3 
AM1/MW 
AM2/LW 
(12)SELECT LISTENING MODE
Press MOD button (12) to choose desired listening mode. (e.g. radio mode to CD mode to CDC mode).
[(e.g. radio mode to CD mode to to AUX (Line)]
7
