Laser AO-BTHD Re-Connectingto A Bluetooth Device, Making Phone Calls With The Ao-Bthd, Function

AO-BTHDUSER MANUAL

RE-CONNECTING TO A BLUETOOTH DEVICE

•Automatic connecting: Every time the AO-BTHD is switched on, it will connect to last connected device automatically

•Manually connecting to the last connected HFP device: When the AO-BTHD is in standby mode and doesn’t connect to any HFP devices, press the MFB button twice, it will connect to the last connected device automatically

Note: Before connecting to a Bluetooth device, please enable the device’s Bluetooth function.

MAKING PHONE CALLS WITH THE AO-BTHD

(The headset must be connected and paired with a Bluetooth compatible mobile phone)

Function	Status of AO-BTHD	Operation
Voice dial	Standby mode	Press and hold the MFB button for 1 second, release
		it when you hear a tone
Redial last	Standby mode	Press the MFB button twice quickly
number
Volume up	Conversation mode	press the + key
Volume down	Conversation mode	press the - key
Answer call	Ringing	press the MFB button
Reject call	Ringing	Press and hold the MFB button for 1 second. Release
		the MFB button when you hear a tone.

Note:

•The AO-BTHD can be switched between music or phone call, so you wont miss incoming calls whilst listening to music

•Not all the mobile phones support all the functions listed above. Please refer to the instruction manual of your mobile phone.

•Some functions and indication tones may vary with different mobile phones.

•When the volume is adjusted to max or min, you will hear an indication tone.

•When accepting or making calls on some mobile phones, the default setting may be to communicate via the phone (speaker and microphone) instead of on the headset. If the is the case, simply switch over to the headset within the phones

9