Precautions, Signs | Lathem 6000E guide

1. PRECAUTIONS

This operation manual is prepared for safe and proper use of the unit. Please follow all the instructions to avoid possible danger to yourself or others and damage to the unit.

Signs

Various warnings and cautions are provided throughout this manual along with signs. Remember each sign and its explanation listed below for your safety and proper operation of the unit.

Warning

Improper handlingmay causebodily accidents including death andserious injury.

Caution

Improperhandling may harmthe human body or material.

Improper handling may cause electric

shock DANGER.

Must-Do sign.

DO NOT disassemble the unit.

Don't sign.

Be sure to remove the line cord plug from the outlet.

Warning

Do not disassemble the unit. There is a high voltage present inside, possibly leading to an electric shock.

Do not modify the unit. Modifications may cause a fire and/or electric shock.

If any anomaly occurs, for example, heat or smoke is generated or obnoxious odor is emitted, unplug the unit immediately and contact your dealer for servicing. There is a danger that further use may cause a fire or electric shock.

Do not use any voltage of the power source other than designated.

Do not share a single outlet with another plug. These may lead to fire or shock hazards.

Do not damage, break, or modify the power cord. Do not put a heavy object on, yank, or forcefully bend the cord, either. These may damage the cord, possibly resulting in a fire or electric shock.

1

Image 4

Lathem 6000E manual Precautions, Signs

Contents

Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions Signs Daily Care Features Location of Controls AccessoriesDaylight saving time indication Day of the week indication Installing Ribbon Cassette Panel open button Mounting Unit on Wall Environmental Conditions Setting Daily Operations Setting Preparation for settingTo prepare for setting Unlock the unit. While holding down Key hole Panel house Display Setting Pay Ending and Card / Print Language Monthly Closing2EMOVE the Panel COVER Stays LIT UP Today is printed on the second line from the top Weekly ClosingPrint language Day of the week Bi-Weekly Closing Bi-weekly closing English Select 12/24 Hour formatDATE/TIME English Setting the Day Advance Time $A AadvancedtimePress or To cause digits to flash, and then press or Setting the Daylight Saving Time D.S.T Daylight saving time function Month and DA 3TARTADATE OFD$34 1/603ETTINGTTHENSTARTTDATE To Select Theh How to Cancel D.S.T. Settings End date Setting the Time Table Program EXT DAY External time signal Column Disabled no setting Enabled Follow the steps to set time table programsPrint color 00 Black 01 Red Time to be set Print in red To set P-01 shown in the tableAbove Print color With P-01 flashing, press Once Lower left of the display Represents print in black Press Erase under MO MinuteErase under TU Erase under MO SA Staying lit up External 1/60 time signal 1/100 Make the barsUnder MO-SA lit up Print in black1/100 To check program settings To modify program settingsTo erase program settings Indication at SEC DS Press Select to cause EXT. Alarm to light up84 !,!2 Resetting Connection Specifications for External Contact Ottom 6IEWScrew Maximum of 8 bells/horns typical Installing Ni-Cd Battery optional Error No. appears TroubleshootingOther failures Specifications External time signalTemperature -5˚ to + 45˚C Connection Time Card Specifications Semi-Monthly Card Q0086 6120