Installing Ribbon Cassette, Panel open button | Lathem 6000E

Installing Ribbon Cassette

	Panel open button
Panel cover	(at both sides of the unit)
Panel cover

Key hole

Panel house

Ribbon cassette

Print head

Print head

Ribbon mask

1Unlock the unit. While holding down the panel open buttons at both sides of the unit, lift the panel cover away from you.

2Turn the knob on the cassette in the arrow-indicated direction to make the ribbon taut.

To insert the ribbon cassette inside the unit, lift the panel house away from

you first. Then thread the ribbon between the ribbon mask and the print head. Slide the latch on the lower side of the cassette into projections on the unit. Then let the cassette snap into place.

When having difficulty inserting the ribbon, insert it while turning the knob.

Make sure that the ribbon is placed between the print head and the ribbon mask as illustrated in the figure at left.

3Put the panel cover on the hook at the back of the unit. Lower it toward this side to close and lock the unit.

Panel cover

Ribbon

5

Image 8

Lathem 6000E manual Installing Ribbon Cassette, Panel open button

Contents

Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions Signs Daily Care Features Daylight saving time indication Day of the week indication AccessoriesLocation of Controls Installing Ribbon Cassette Panel open button Mounting Unit on Wall Environmental Conditions Setting Daily Operations Setting Preparation for settingTo prepare for setting Unlock the unit. While holding down Key hole Panel house Display Setting Pay Ending and Card / Print Language Monthly Closing2EMOVE the Panel COVER Stays LIT UP Print language Day of the week Weekly ClosingToday is printed on the second line from the top Bi-Weekly Closing Bi-weekly closing English DATE/TIME 12/24 Hour formatSelect English Setting the Day Advance Time $A AadvancedtimePress or To cause digits to flash, and then press or Setting the Daylight Saving Time D.S.T Daylight saving time function Month and DA 3TARTADATE OFD$34 1/603ETTINGTTHENSTARTTDATE To Select Theh How to Cancel D.S.T. Settings End date Setting the Time Table Program EXT DAY External time signal Column Disabled no setting Enabled Follow the steps to set time table programsPrint color 00 Black 01 Red Time to be set Print in red To set P-01 shown in the tableAbove Print color With P-01 flashing, press Once Lower left of the display Represents print in black Press Erase under TU MinuteErase under MO Erase under MO SA Staying lit up External 1/60 time signal 1/100 Make the barsUnder MO-SA lit up Print in black1/100 To check program settings To modify program settingsTo erase program settings Indication at 84 !,!2 Press Select to cause EXT. Alarm to light upSEC DS Resetting Connection Specifications for External Contact Ottom 6IEWScrew Maximum of 8 bells/horns typical Installing Ni-Cd Battery optional Other failures TroubleshootingError No. appears Specifications External time signalTemperature -5˚ to + 45˚C Connection Time Card Specifications Semi-Monthly Card Q0086 6120