Lava Computer Parallel-PCI/LP Card installation manual Windows Hardware Driver Installation

Windows Hardware and

Driver Installation

1.Before opening the casing of your computer, make sure that all power is off.

2.Locate an unused PCI slot and insert the Parallel-PCI/LP card into it. Ensure that the card is well seated.

3.Screw the metal bracket of the Parallel-PCI/LP card to your PC’s casing and replace the machine’s cover.

4.Connect your parallel (printer) cable to the port on the Parallel- PCI/LP card and turn the PC on.

5.When Windows starts, it will find a Parallel-PCI/LP Controller and will ask you for a driver for this device. When prompted, insert the installation diskette into your floppy drive. After copying the

Screw for attaching card bracket to PC casing

Port

PCI Slot