Please Read First

CAUTION: To reduce the risk of electrical shock, do not remove the cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation maintenance (servicing) instructions in the literature 7accompanying the appliance.

PRECAUTIONS:

Certain precautions must be taken in order to ensure proper operation of your preamplifier-processor.

1.Never expose the unit to moisture

2.Never plug an input cable into the preamplifier while the preamplifier is turned on.

3.Never apply the “thumb test” (touching the “hot” lead of the input cable with your finger) to the tip of the input cable or input jack of the preamplifier. RF rectification and/or hum may be created and could cause damage to the loudspeakers. ATI will not be responsible for damage to the loudspeakers, amplifiers or other related equipment due to improper use of the equipment.

4.Avoid restricting the airflow around the unit. Good airflow is necessary to help insure proper operation.

5.Do not stack other system components or any other materials directly on top of the unit. The heat dissipating system of the preamplifier depends on free flowing air around the chassis.

Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Read all the safety and operating instructions before connecting or using this unit.

All warnings on the unit and in this operating manual should be adhered to.

All operating and use instructions should be followed.

Do not use this unit near water: for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

This unit should be installed so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings: or placed in a built-in installation, such as bookcase or cabinet, that may impede the flow of air through its ventilation openings.

The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

The unit should be connected to a power-supply outlet only of the voltage and frequency marked on its rear panel.

The power-supply cord should be routed so that it is not likely to be walked on or pinched, especially near the plug, convenience receptacles, or where the cord exits from the unit.

Clean unit only as recommended in this instruction manual.

The power-supply cord of the unit should be unplugged from the wall outlet when it’s to be unused for a long period of time.

Care should be taken so that objects do not fall, and liquids are not spilled, into the enclosure through any openings.

The unit should be serviced by qualified service personnel when: A. The power cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled, into the unit; or

C. The unit has been exposed to rain, or liquids of any kind; or D. The unit does not appear to operate normally, or exhibits a

marked change in performance; or

E. The device has been dropped, or the enclosure damaged.

To prevent electric shock, do not use the polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Page 2

Page 1 Page 3
Page 2
Image 2
Legend Audio ATP 7500 manual Please Read First, Safety Instructions
Page 1 Page 3

ATP 7500 specifications

The Legend Audio ATP 7500 is a standout audio powerhouse designed for audiophiles and professionals alike. Its impressive sound performance, combined with advanced technologies and elegant design, makes it an indispensable addition to any audio setup. This premium product boasts a plethora of features that elevate the listening experience to new heights.

At the heart of the ATP 7500 is a high-performance amplifier that delivers robust power output without compromising sound fidelity. With a total output power of 7500 watts, this amplifier can drive even the most demanding speakers effortlessly, ensuring crystal-clear sound reproduction across all frequencies. The built-in digital signal processing (DSP) allows users to tailor their audio experience, offering customizable presets for various genres and environments.

One of the standout features of the ATP 7500 is its cutting-edge Class D amplification technology. This design not only makes the amplifier lightweight and compact but also enhances energy efficiency. The resulting reduced heat generation means the ATP 7500 can run for extended periods without overheating, ensuring reliability during long listening sessions or live performances.

Connectivity is paramount in today’s audio landscape, and the Legend Audio ATP 7500 does not disappoint. It includes multiple input options, such as XLR, TRS, and RCA, enabling seamless integration with a variety of audio sources, from professional mixing consoles to home theater systems. Bluetooth connectivity further extends its versatility, allowing for wireless streaming from smartphones and tablets with ease.

Another important feature of the ATP 7500 is its advanced protection circuitry, designed to safeguard both the amplifier and connected speakers from damage during operation. This built-in technology prevents overheating, short-circuits, and DC offsets, ensuring peace of mind while pushing the system to its limits.

The build quality of the ATP 7500 is exceptional, featuring a rugged chassis that is both durable and aesthetically pleasing. The intuitive front panel includes clearly labeled controls and LED indicators, allowing for easy operation and adjustments on the fly.

In summary, the Legend Audio ATP 7500 stands out with its powerful output, advanced Class D technology, versatile connectivity, and exceptional build quality. Whether used in a home studio, live performance, or as part of a home theater system, it offers an unparalleled audio experience that will satisfy even the most discerning listeners.
Top Page Image Contents