Operation
Universal Remote Control
Display mode
1. choose the device you wish to program.
2.To enter display mode, while press and holding ENTER key, press the INPUT key and device LED will be ON, keep the status for about 3 seconds and the LED will blink, indicating that the Controller is ready for programming, then release both keys.
3. Sequence press 9, 8, 0 to enter display mode.
4.Press digit 1 key to get the first digit of current codeset. For example, if the first digit of codeset is 1, so then led will blink once and remains OFF. Digit “0” in codeset will not be displayed. Blink Freq is 1HZ.
5.Press digit 2 key to get the second digit of current codeset. For example, if the second digit of codeset
is 3, so then led will blink three times and remains OFF. Blink Freq is 1 HZ.
6.Press digit 3 key to get the third digit of current codeset. Blink Freq is 1 HZ.
7. Only digit 1, 2, 3 are valid in this mode. And the sequence is not fixed.
Controller will not send out data in this mode if user presses any keys other than digit 1, 2, 3, or no key was pressed in 30 seconds, display mode is ended.
Punch-Through Features
The Controller provides two
Volume Punch-Through
The TV Volume/Mute
Transport Key Punch-Through
The DVD or VCR transport key punch through feature lets you control the PLAY, STOP, PAUSE, REWIND, FF and RECORD functions of your DVD or VCR while the Control operates in other modes. The feature is applicable for all devices and brands that do not use the transport keys for other purposes.
Fast Programming Haier default TV codeset
Press and holding the ENTER key and then press POWER key for 3 seconds, the LED will blink 3 times and turn off, default Haier codeset (001) will be programmed to the control.
34 TV
