Installation
External Equipment Connections
Connecting a computer
How to connect
1.To get the best picture quality, adjust the VGAgraphics card to 1024x768 .
2.Use the TV`sVGA or DVI (Digital VisualInterface)Audio IN port for audio connections, depending on your computer connector.
If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of either VGAIN or HDMI IN todisplay the VGA on theTV.
If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or HDMI ; (theother mode isset to Plugand Play automaticallyby theTV.)
3.Then,make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.
How to use
1.Turnon the computerand theTV.
2.Use INPUT onthe remote control to select VGAor HDMI source.
3.Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA graphic card or consult the manufacturer of the VGA graphic card.
Note
1.Use a DVI cable.
2.Avoid keeping a fixed imageon the TV's screen fora long periodof time. The fixed image may becomepermanently imprinted on the screen.
3. Thesynchronization input form for Horizontal and Vertical frequencies is separate.
Resolution
| Resolution | Frame | |
Mode | frequency | ||
| |||
|
| (Hz) | |
VGA | 640x480 | 60Hz | |
SVGA | 800x600 | 60Hz | |
75Hz | |||
|
| ||
XGA |
| 60Hz | |
1024x768 | 75Hz | ||
|
| ||
|
|
|
VIDEO IN COMPONENT IN OPTICAL OUT
| 2 | |
| L | |
2 | DVI AUDIO | |
1 | ||
| ||
| R |
1
Y | Pb | Pr | L AUDIO R | VGA AUDIO | VGA |
|
1 |
|
|
|
|
|
|
VIDEO | L AUDIO | R | VIDEO | L AUDIO R | ||
AV OUT VGA IN HDMI INANT IN
12 TV
