continuous measurement, sweep the laser back and forth and up and down over the ideal target point. 
Press to stop continuous measurement (2). The result is displayed in the summary line, the partial results in the secondary line.
Indirect Measurement - determining a dis- tance using 3 measurements
See figure {N}
Press this button twice; the display shows the following symbol 
. The laser is switched on.
Aim at the upper point (1) and trigger the measurement. After the first measurement the value is adopted. Keep the instrument as horizontal as possible
Press and hold down this button to trigger continuous measurement, sweep the laser back and forth and up and down over the ideal target point. 
Press to stop continuous measurement (2). The value is adopted. Aim at the lower point and
Press this button to trigger the measurement
(3). The result is displayed in the summary line, the partial results in the secondary lines.
Indirect measurement - determining a chain value using 3 measurements
See figure {O}
e.g. determining the height between point 1 and point 2 using three target points.
Press this button three times ; the display shows the following symbol 
. The laser is switched on.
Aim at the upper point (1).
Press this button and trigger the measurement. After the first measurement the value is adopted. The display flashes (2).
Triggers the measurement. After the second measurement the value is adopted. The display flashes (3).
Press and hold down this button to trigger continuous measurement. Sweep the laser back and forth and up and down over the ideal target point.
Press this button to end continuous measure- ment. The result is displayed in the summary line, the partial results in the secondary lines.
EN |
Leica DISTO™ D3 760498a en
13
