EN |
Tilt measurements: |
| |
Tilt sensor: |
| |
Accuracy |
| |
(2 σ, standard deviation) | ± 0.3° | |
- to laser beam | ||
- to the housing | ± 0.3° | |
Indirect measurement |
| |
using tilt sensor (direct | 9 | |
horizontal distance) |
| |
Angle measurement using | 9 | |
tilt sensor(± 45°) | ||
| ||
General: | II | |
Laser class | ||
Laser type | 635 nm, < 1 mW | |
Ø laser point | 6 / 30 / 60 mm | |
(at distances) | (10 / 50 / 100 m) | |
Autom. laser | after 3 min | |
Autom. instrument switch- | after 6 min | |
off | ||
| ||
Display illumination | 9 | |
Keypad illumination | 9 | |
Multifunctional endpiece | 9 | |
Timer | 9 | |
Save constant value | 9 | |
Historical storage | 9 | |
(20 values) | ||
| ||
Tripod thread | 9 | |
Battery life, | up to | |
Type AAA, 2 x 1.5V | 5 000 measurements | |
Protection against | IP 54, | |
splashes and dust |
Dimensions | 125 x 45 x 25 mm |
Weight (with batteries) | 110 g |
Temperature range: | |
Storage | |
Operation | (13°F up to +158°F) |
| (14°F up to +122°F) |
*maximum deviation occurs under unfavourable conditions such as bright sunlight or when measuring to poorly reflecting or very rough surfaces. Measuring accuracy may deteriorate by approx.
± 0.1 mm/m for distances above 30 m.
Measuring conditions
Measuring range
The range is limited to 100 m.
At night or dusk and if the target is in shadow the measuring range without target plate is increased. Use a target plate to increase the measurement range during daylight or if the target has poor reflec- tion properties.
Target surfaces
Measuring errors can occur when measuring toward colourless liquids (e.g. water) or dust free glass, Styrofoam or similar
Aiming at high gloss surfaces may deflect the laser beam and lead to measurement errors.
Appendix
16
Leica DISTO™ D3 760498a en
