Leica D-Lux 2 manual 109, Select a picture to be printed, Set the print settings, Single picture

Connecting to a PC or Printer

■Single picture

1 Select a picture to be printed.

PictBridge 100_0001

1/19

PLEASE SELECT

THE PICTURE TO PRINT

SELECT PRINT

• A message displays for about 2 seconds.

2 Set the print settings.

SINGLE PICTURE

PRINT START
PRINT WITH DATE
NUM. OF PRINTS	1
PAPER SIZE
PAGE LAYOUT
SELECT SET	CANCEL	MENU

•The items which are not supported by the printer are displayed in gray and cannot be selected.

•When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] and [PAGE LAYOUT] to [F] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.)

■[PRINT WITH DATE]

FSettings on the printer are prioritized.

OFF	Date is not printed.
ON	Date is printed.

•If the printer does not support date printing, the date cannot be printed on the picture.

■[NUM. OF PRINTS]

Set the number of prints.

■[PAPER SIZE]

(Possible paper sizes on the camera) The items are listed on 1/2 and 2/2. Press r to select the desired item.

1/2

F	Settings on the printer are
	prioritized.
L/3.5″×5″	89 mm×127 mm
2L/5″×7″	127 mm×178 mm
POSTCARD	100 mm×148 mm
A4	210 mm×297 mm
2/2*
CARD SIZE	54 mm×85.6 mm
10×15cm	100 mm×150 mm
4″×6″	101.6 mm×152.4 mm
8″×10″	203.2 mm×254 mm
LETTER	216 mm×279.4 mm

*These items cannot be displayed when the printer does not support the paper sizes.

109