
Leica LED3000 NVI™ (Near Vertical Illumination)
Required tools | Installing the Leica LED3000 NVI™ | Alternative installation for manual columns | |
★★ None | 1. Connect the Leica LED3000 NVI™ to the | 1. | Connect the external power supply unit |
| focusing column via the CTL2 connection if |
| (10 450 266) to the Leica LED3000 NVI™. |
| the focusing column is equipped with inte- |
|
|
The Leica LED 3000 NVI™ can be used | grated electronics. | 2. | Place the Leica LED3000 NVI™ on the optics |
with any objectives that have an outer |
|
| carrier from below and tighten the locking |
diameter of 58 mm. |
|
| screw. |
The supported working distance is between 50 mm and 150 mm.
Leica | User Manual | 25 |
|
|
|