OPERATION
immediately to switch on or off R.D.S. mode.
Whenever R.D.S. is switched on, symbol “AF” appears on the display. Program name is displayed on receiving a R.D.S. station.
“AF” starts blinking if the broadcasting signal getting worse. “ALARM” will be displayed when an emergency broadcasting is received; meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum.
-Regional Program Operation
Press AF/REG button (3) for several seconds to switch on or off region mode.
Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time period. When region is on, the current listening program remains unchanged. When region is off, it allows the reception moves to the regional station.
-Using PTY to Select Program
PTY button (1) is operated as follows:
PTY MUSIC group
PTY SPEECH group
PTY off
While selecting PTY engagement, its selection is implemented by preset buttons as described in notes. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected.
If corresponding PTY information is not existed any more, PTY engaging is automatically exit to normal mode. Notes:
When PTY mode is engaged, the PTY switch is shared as follows:
PTY MUSIC group
PTY SPEECH group
PTY off
According to above 2 allotted group,
the preset number is used for PTY selection as follows:
MUSIC group
-POP M, ROCK M
-EASY M, LIGHT M
-CLASSICS, OTHER M
-JAZZ, COUNTRY
-NATION M, OLDIES
-FOLK M.
SPEECH group
-NEWS, AFFAIRS, INFO
-SPORT, EDUCATE, DRAMA
-CULTURE, SCIENCE, VARIED
-WEATHER, FINANCE, CHILDREN
-SOCIAL, RELIGION, PHONE IN
-TRAVEL, LEISURE, DOCUMENT
-Listening to Traffic Announcement TA button (2) is operated as follows: When pressed short, it is engaging whether TA mode on or off.
When TA mode, is on and a traffic announcement is transmitted: When the unit was in CD (MP3) mode, it will switch temporarily to radio mode.
Temporary switch over to an R.D.S. linked station when R.D.S. detects a traffic announcement on that other program. If the volume level was under the threshold point it will be raised to the threshold point.
But the user changed the volume level which was more than the threshold point (min. TA volume level), it will be set to the last level. When TA mode is on, TA of individual segment is turned on.
When a TP station is received, TP of individual segment is turned on.
TA interruption function
The current traffic announcement is cancelled by pressing this key.
But the TA mode will not be off. When pressed long, it is selected R.D.S. TA LOCAL/R.D.S. TA DISTANCE mode.
The purpose of this key is to reduce wanted R.D.S. TA switching, which
