4Inter-Tel® Model 8662 User Guide (ITP Mode)

FINDING YOUR WAY

Feature Button Functions

The feature buttons are designed to automate some of the commonly used functions,

such as dialing an outside number. Each of these is described in the table below.

In addition to the buttons identified in the preceding table, your endpoint has a Spe-

cial button ( ). Depending on how your telephone system is configured, you may

need to press this button before you dial a feature code. Consult your system adminis-

trator if you have questions about how your system is configured.

BUTTON IF YOU... YOU CAN... PG.
Press and hang up Answer a call using the speaker. 19
Press the high or low end of the volume
button Adjust volume during a call. 44
Press (International Hold Symbol) Put a call on hold. 22
Press an unlit button or the flashing
button Select an outside line or answer a call. 20, 21
Press Access an intercom call. 19
Press Mute the microphone. 30
Press unlit or lit Enable/disable Do-Not-Disturb mode. 40
Press Choose a page zone to place a page. 57
Press View or access Speed-Dial numbers. 53
Press View or access System Speed-Dial
numbers. 55
Press Redial a telephone number or save the
last number dialed. 28
Press and dial the numbers you
would like to add to the conference Place a conference call. 23
Press and dial the destination
number Transfer a call. 24
Press Leave or listen to a message. 31
Press and dial the destination
number Forward calls to the specified number. 26
Press Answer a call. 19, 21
Press and dial the number Place an outgoing call. 20
CALL CALL
IC IC
MUTE MUTE
DND DND
PAGE PAGE
STN SPDL STN SPDL
SYS SPDL SYS SPDL
REDIAL REDIAL
CNF CNF
TRANSFER TRANSFER
MSG MSG
FWD FWD
ANSWER ANSWER
OUTGOING OUTGOING