13.3 Cleaning the Professional-Cappuccino Frother
The
Fill water in a container and immerse the hose in it.
Draw off steam until the water/steam mixture is clean.
If necessary, disassemble the
For proper cleaning, use the JURA Auto Cappuccino Clean- ing Agent This is available at your authorized dealer. Daily cleaning is recommended.
14. Switching off the IMPRESSA
To ensure perfect operation, please switch your IMPRESSA to standby mode with the (3) symbol first. Then switch the machine off with the power switch (21).
READY
Switch off the IMPRESSA using the ON/OFF key (3).
RINSING
An automatic rinsing operation is started.
15. Programming
When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually.
You can programme the following stages:
Filter
Water hardness
Aroma
Temperature
Time
Automatic
Automatic
Language
Display
|
| Programming key | (4) |
|
|
| Use the programming | key | (4) to open or quit the |
|
|
programming mode (no saving of values effected).
Rotary switch
Turn the Rotary Switch to change the adjusted values or to select the next programming step.
Press the Rotary Switch to check the values adjusted or to save the values selected
15.1 Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
15.2 Programming the water hardness
Refer to Chapter 4 «Adjusting the water hardness».
15.3Programming the aroma ROBUST or STANDARD
When the machine leaves the factory, the aroma is set to robust. If requested it can also be set to Standard.
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
14