Lennox Hearth F50 manual Programming the automatic switch-on time, Cup counter

If the machine is disconnected from power supply, the time must be programmed again.

15.6 Programming the automatic switch-on time

You must programme the time (Chapter 15.5) if you want to use the automatic switch-on function.

 READY

Press programming key (4) until

FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until MACHINE ON is displayed.

 MACHINE ON

Now press the Rotary Switch (1) to start programming the switch-on time.

 --:--

Turn the Rotary Switch (1) to adjust the hours.

 12:--

Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.

 12:--

Turn the Rotary Switch (1) to select the minutes.

 12:05

To confirm the new switch-on time, press the Rotary Switch (1).

 MACHINE ON

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

 READY

15.7 Programming the automatic switch-off time

You can programme your coffee machine such that it will switch off automatically after a certain time. You can pro- gramme the switch-off time in a range between 0.5 and 9 hours, or select ––:–– (i.e. inactive).

 READY

Press programming key (4) until

FILTER appears.

The illuminated ring (2) is active.

Turn the Rotary Switch (1) until OFF AFT. HR is displayed.

 OFF AFT. HR

Now press the Rotary Switch (1) to start programming the switch-off time. Switch-off time OFF AFT. HR

 5.0 HR

Turn the Rotary Switch (1) to adjust the hours.

 1.0 HR

To confirm the new switch-off time, press the Rotary Switch (1).

 OFF AFT. HR

Press the programming key (4) to quit the programming mode or select the next programming item using the Rotary Switch (1).

 READY

15.8 Cup counter

You can check how many cups of the following coffee products were drawn off:

a)1 cup

b)2 cups

c)Powder coffee

16