Note: Diagrams aND illustratioNs are Not to scale. 13
1. Appliance operation may be controlled through the ON/OFF unit
rocker switch, located in the bottom front of the appliance or through
an optional remote control.
2. When lit for the first time, the appliance will emit an odor for an hour
or two. this is due to the “burn-in” of the internal paints and lubricants
used in the manufacturing process. For the first few hours, operate the
appliance with doors and windows open to encourage the dissipation
of odor.
CLEANING AND SERVICING
WARNING
Turn off the appliance and allow to cool before cleaning.
Verify proper operation after servicing.
OPERATION AND CARE OF YOUR APPLIANCE
WARNING
You must keep control areas, burners and circulating air
passageways of appliance clean. Failure to keep the
primary air opening(s) of the burner(s) clear may result
in sooting and property damage. Inspect these areas of
appliance before each use. Have appliance inspected
yearly by a qualified service person. Appliance may
need more frequent cleaning due to excessive lint form
carpeting, bedding material, etc.
only limited cleaning will be required under the normal use of the appli-
ance. Dust the front grate, the top of the piezo cover and the control knob
occasionally. Do not use cleaning fluids to clean the logs or any other
part of the appliance.
remove the log set, gently handling at each end. use a vacuum cleaner to
remove loose particles from the base and from around the burners. gloves
are recommended to prevent the fibers from pricking your skin. if the skin
is pricked, wash gently with soap and water. replace the log set.
if, after a period of use, the flames start to exhibit unusual shapes and
behavior, if there is any evidence of soot formation, blue tipping of the
flames, or any strong odors, or the burners fail to ignite smoothly, then
the burner holes may require some cleaning. if this happens, it is pref-
erable to contact your nearest authorized service technician to get the
appliance serviced.