LENNOX HEARTH PRODUCTS KITS AND ACCESSORIES

775,175M REV. B 12/2005
Cat. No.
Model
Description

H1538

TK3-36BL
3-pc. Black Trim Kit, MPE-36R,

H1539

TK3-36PB
3-pc. Brass Trim Kit, MPE-36R

H1540

TK3-36BS

3-pc. Stainless Trim Kit, MPE-36R

H3435

TK3-33BL
3-pc. Black Trim Kit, MPE-33R

H3436

TK3-33PB
3-pc. Brass Trim Kit, MPE-33R

H1932

TK3-33BS

3-pc. Stainless Trim Kit, MPE-33R

INSTALLATION INSTRUCTIONS FOR TRIM KITS

FOR USE WITH MODELS MPE-33R AND MPE-36R ELECTRIC FIREPLACE

* KIT CONTENTS:

1 ea. Top Panel

1 ea. Left Side Panel

1 ea. Right Side Panel

6 ea. Magnets

*Note: Trim Kits with Brass and Stainless Finishes also include:
1 ea. Left Side Channel
1 ea. Right Side Channel
1 ea. Top Channel
Double-sided tape on panels

(If the kit you purchased includes channels and double-sided tape, they should be used)

Top Panel

~8”

Figure 2

Step 2.
*Side Channels

Figure 1

*Top Channel
Right Panel
Left Panel
Magnets
Brass and Stainless Trim Kits - Proceed to Step 3.
Black Trim Kits - Proceed to Step 4.

Step 3. Place the side channels over the magnets (See Figure 3 ). Ensure that the two side channels are flush with the bottom of the fireplace. The wider side of the side channel should be on the front of the fireplace face after installation.

CAUTION: CAREFULLY SEPARATE THE MAGNETS BY TWISTING THEM APART. BE VERY CAREFUL WHEN HANDLING, BECAUSE THE MAGNETS ARE VERY POWERFUL AND CAN SNAP TOGETHER UNEXPECTEDLY AND POSSIBLY PINCH THE SKIN OR FRACTURE THE MAGNETS.

TOOLS REQUIRED:

None

INSTALLATION INSTRUCTIONS:

This kit contains trim panels used to finish the gaps between the wall- board or optional mantel and the fireplace, providing the appliance a finished built-in look.

ENSURE FIREPLACE IS COOL TO THE TOUCH BEFORE STARTING INSTALLATION OF THE TRIM KIT

Step 1. Place 2 magnets on each side of the fireplace, placed at approximately 8” from the top and 8” from the base. See Figure 2.

Side
Channel
Approximate
Magnet
Placement
Ensure
Channel is
Flush with
Base

Figure 3

Step 3. Peel off the backing on the double-sided tape on the backside of each side trim panel (see Figure 4 ). Avoid touching the sticky surface of the tape.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Page 1 of 2