E2008 Lennox Industries Inc.
Dallas, Texas, USA
RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE
L3011C Thermostat
The Lennox ComfortSenset 3000 Series model L3011C
Thermostat model L3011C t is suitable for
General
These instructions are intended as a general guide and do not supersede local codes in any way. Consult authorities having jurisdiction before installation.
Check equipment for shipping damage. If you find any damage, immediately contact the last carrier.
Introduction
This document describes the operation of Lennox model L3011C thermostat. Refer to the installation manual for instructions regarding installation and wiring of the thermo- stat.
02/08
OPERATION MANUAL
ComfortSenset 3000 Series
Model No. L3011C
Non-Programmable Thermostat
CONTROLS
506079−01
02/08Litho U.S.A. Supersedes 504,865M
Table of Contents
L3011C Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Initial Thermostat
Heating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cooling Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adjusting Temperature Setpoint . . . . . . . . . . . . . . . . . 3
Fan Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Filter Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Service Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Thermostat RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Default Thermostat Settings . . . . . . . . . . . . . . . . . . . . 5
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . 5
Thermostat Output Table . . . . . . . . . . . . . . . . . . . . . . . 6
Initial Thermostat Power-up
When power is initially applied to the thermostat, the dis- play will appear as shown in figure 1.
| 88 | FILTER |
ROOM | SERVICE | |
|
| FAN |
|
| ON |
| 88 | AUTO |
SETPOINT | SYSTEM | |
|
| COOL |
|
| OFF |
|
| EMG. |
|
| HEAT |
Figure 1. Display − Initial Power−Up
All display segments are momentarily activated. This oc- curs as a normal part of thermostat initialization. Within a few seconds, the display will appear as shown in figure 2 (figure shows temperature in Fahrenheit units).
506079−01
*2P0208* |
|