Lenovo 10120/90A0 [K450 NON-ES] manual Replacing a memory module, To replace a memory module

Replacing a memory module

Note: For this procedure, it helps to lay the computer on a flat, stable surface.

To replace a memory module:

1.Remove the computer cover. Refer to “Removing the computer cover”.

2.Locate the memory module connectors. Refer to “Locating components”.

3.Remove the memory module to be replaced by opening the retaining clips as shown.

4.Position the new memory module over the memory connector. Make sure

that the notch on the memory module aligns correctly with the connector key on the system board. Push the memory module straight down into the connector until the retaining clips close.

5. Reattach the computer cover.

User Guide 51