Lenovo 10089/1168/4744 [K410], 10121/90A1 [K450 ES] manual Replacing hardware, General information

Models: 10120/90A0 [K450 NON-ES] 10121/90A1 [K450 ES] 10089/1168/4744 [K410] 10086/3109/4743 [K430] 10090/2556/4748 [K415]

1 69
Download 69 pages 40.91 Kb
Page 53
Image 53
Replacing hardware

12V power connector Microprocessor and heat sink Memory slots (4)

Mini PCI-E slot eSATA connector

Solid state disk power connector (Optional)

SATA connectors (4) Front panel connector Mode switch connector ROM socket

Front USB header Front audio connector System fan header

Battery

Microprocessor fan header Thermal sensor header Power connector

Power fan header LPC debug connector

Serial (COM2) connector SPI debug connector Front USB connector (2) Clear CMOS jumper

PCI express X 1 adapter slots (3) PCI express X 16 adapter slot

Replacing hardware

Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://support.lenovo.com.

General information

Pre-disassembly instructions

Before proceeding with the disassembly procedure, make sure that you do the following:

1.Turn off the power to the system and all peripherals.

2.Unplug all power and signal cables from the computer.

3.Place the system on a flat, stable surface.

48User Guide

Page 53
Image 53
Lenovo 10089/1168/4744 [K410], 10121/90A1 [K450 ES] Replacing hardware, General information, Pre-disassembly instructions