Lenovo 27 Series manual Playing with the E-Dice

Playing with the E-Dice

The E-Dice is paired in the factory for your convenience. It should work immediately after plugging the dongle into your computer.

To play with the E-Dice, do the following:

1.Plug the dongle into USB connector of your computer.

2.Lay the computer face-up on a flat surface to switch the desktop interface to the Aura program. Open the Lenovo Tycoon game and play the game with the E-Dice as per the directions.

You may need to manually pair the E-Dice if it does not work.

To pair the E-Dice, do the following:

1.Open the Lenovo Tycoon game and go to the Dice Inspection interface. Click the Inspection Start button in the pop-up dialog box, then roll the E-Dice. The dice on the screen will roll and stop with the E-Dice.

2.Click Inspection Completed → OK to finish the pairing process.

Note: You need to pair all the E-Dice before playing a game. Only successfully paired E-Dice can be used for the game.

If the E-Dice does not pair successfully, please do the following:

1.Check that the E-Dice battery has not run out or run low.

2.Check that the dongle is securely connected to your computer.

After checking the above, wait a few minutes and repeat the pairing process.

User Guide 11