Lenovo SL410, 28472JU, SL510, 28472PU, 28472QU manual When installing

Table 20. Installation of palm rest assembly with cables

When installing:

1.Attach the cables to the system board firmly.

2. Attach the palm rest so that the two small projections of the palm rest ( ) firmly fit into the guide holes of the keyboard bezel as shown in this figure.

a

a

3.Push the front side of the palm rest until it clicks into place.

4.Close the LCD cover and turn the computer over. Then fasten the screws to secure the palm rest.

Removing and replacing a FRU 99