Step 4. Attaching the cables to the drive
The following diagram shows where to connect the cables to the drive.
1. Attach a 7-pin Serial ATA data cable connector1to the Serial connector on the drive.

2. Attach a 15-pin power cable2to the power connector on the drive.

Step 5. Completing the hardware installation
1. Ensure that the drive is securely mounted and that the connectors are firmly attached.
2. Ensure that the cables do not interfere with the computer cover, and that they do not block the
power-supply fan blades or airflow paths.
3. Reinstall the computer cover.
4. Reconnect all external devices.

5. Reconnect all power cords into the electrical outlets.

2-2 ThinkCentre and Lenovo Super Multi-Burner Drive (Serial ATA) User’s Guide