Lenovo 7821, 7782, 7824, 7823, 7783 manual Remove the new PCI card from its static-protective package

Figure 12. Removing a PCI card

Notes:

a.The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot.

b.If the card is held in place by a retaining latch, disengage the card retaining latch in either of the two ways illustrated, depending on the retaining latch on the PCI card slot. Grasp the card and gently pull it out of the slot.

Figure 13. Disengaging the card retaining latch

5.Remove the new PCI card from its static-protective package.

6.Install the new card into the appropriate slot on the system board. See “Locating parts on the system board” on page 11.

Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips are closed before you install the graphics card.

Chapter 4. Installing or replacing hardware 29