5.Lift the microprocessor straight up and out of the socket.
Figure 13. Lifting the microprocessor
Notes:
a.Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the system board.
b.Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.
6.Make sure that the microprocessor retainer is fully open.
7.Holding the microprocessor with your fingers, remove the protective cover 2 that protects the gold contacts on the new microprocessor 1.
8.Holding the microprocessor with your fingers, align the notches on the microprocessor with the tabs in the microprocessor socket
9.Lower the microprocessor straight down into the socket.
