Lenovo 9644, 9638, 9643, 9645, 9640, 9641, 9300, 9301, 9642 Note: H1 command is not supported for Italy

￿￿￿		￿￿
+++		Escape Characters - Switch from Data Mode to
		Command Mode (T.I.E.S. Command)
H_	H0	Force modem on-hook (hang up)
	H1	Force modem off-hook (make busy)

		Note: H1 command is not supported for Italy
I_	I0	Display product-identification code
	I1	Factory ROM checksum test
	I2	Internal memory test
	I3	Firmware ID
	I4	Reserved ID
L_	L0	Low speaker volume
	L1	Low speaker volume
	L2	Medium speaker volume
	L3	High speaker volume
M_	M0	Internal speaker off
	M1	Internal speaker on until carrier detected
	M2	Internal speaker always on
	M3	Internal speaker on until carrier detected and off
		while dialing
N_		Included for compatibility only, provides no
		effect
O_	O0	Return to Data Mode
	O1	Return to Data Mode and initiate an equalizer
		retrain
P		Set Pulse dial as default
Q_	Q0	Modem sends responses
Sr?		Read and display value in register r.
Sr=n		Set register r to value n (n = 0-255).
T		Set Tone Dial as default
V_	V0	Numeric responses
	V1	Word responses
W_	W0	Report DTE speed only
	W1	Report line speed, error correction protocol, and
		DTE speed.
	W2	Report DCE speed only
X_	X0	Hayes Smartmodem 300 compatible
		responses/blind dialing.
	X1	Same as X0 plus all CONNECT responses/blind
		dialing
	X2	Same as X1 plus dial tone detection
	X3	Same as X1 plus busy detection/blind dialing

72￿￿ ￿￿￿