Initial setup instructions
1) Adjust the angle for the best viewing experience. It can be rotated between 15 degrees and 35 degrees from the vertical position.
15° min. | 35° max. |
|
3) Connect the power cord to the computer and the electrical outlet as shown below.
All-in-One Desktop PC
The computer stand must remain installed at all times to ensure maximum system stability.
Make sure the angle of the computer is at least 15 degrees from the vertical position; otherwise the computer will be unstable and could fall over. To open the computer stand, refer to the illustration:
4) Press the power button on the side of the computer to turn it on.
Unpack
1. | Computer | 2. Mouse 3. Power cord | 4. Keyboard 5. User manual |
6. | Remote control (Selected models only) | 3 | |
1 | 2 |
2) If the computer is configured with a wired keyboard and mouse, connect the keyboard and mouse cables to the appropriate keyboard (PS/2 connector) and mouse connectors (USB connector).
If the computer is configured with a wireless keyboard and mouse, setup the keyboard and mouse wireless connection.(For more details refer to the back of this poster).
4 5 6
Version: 1.1
31040254C31044158
Touch buttons
The buttons located at the