Appendix A. CRU instructions

Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot).

To make sure that the DDR3 SDRAM is installed correctly, do as follows:

1Turn the computer on.

2Hold F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer.

38

Page 42
Image 42
Lenovo B560 manual Appendix A. CRU instructions