Lenovo ideapad 100S-14IBR
1120 EDP cable and integrated camera
For access, remove these FRUs in order:
•“1010 Base cover” on page 32
•“1020 Battery pack” on page 35
•“1030 Solid state disk (on select models)” on page 37
•“1040 PCI Express Mini Card for wireless LAN” on page 38
•“1080 System board” on page 43
•“1090 Upper case” on page 45
•“1100 LCD unit” on page 47
•“1110 LCD hinges” on page 49
Figure 12. Removal steps of EDP cable and integrated camera
Note: The integrated camera is stuck on the top center of the LCD cover.
Detach the connector in the direction shown by arrow 1. Then remove the camera board in the direction shown by arrow 2.
1
2
When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement of it to make sure the connector is attached firmly.
51
