Lenoxx Electronics 820M manual Battery Installation, To Insert The Tape

Models: 820M

1 4
Download 4 pages 16.27 Kb
Page 2
Image 2
BATTERY INSTALLATION

BATTERY INSTALLATION

Slide the BATTERY DOOR in the direction shown by the arrow to open the door and insert 2 “AA” batteries, taking care not to reverse the positive and negative polarities.

Alkaline batteries are recommended and will normally provide more playing time.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

NOTE:

Remove the batteries during long periods (about 30 days or more) of nonuse, possible battery leakage and corrosion can damage the set.

If the sound becomes weak and unclear, the batteries may be weak. Replace both batteries at once.

TO INSERT THE TAPE

1.Open the CASSETTE DOOR by holding the door as shown and gently pulling it to you.

2.Insert the tape into the cassette holder ON THE DOOR.

3.Close the CASSETTE DOOR gently till it clicks shut.

CAUTION: Do not pull door too strongly or you may damage the door, treat this set with care and it will last a long time.

--- 2 ---IB-820M(B)-WM-E-050703

Page 2
Image 2
Lenoxx Electronics 820M manual Battery Installation, To Insert The Tape