Lenoxx Electronics 820M manual Tape Play, To Hear The Same Song Again, Bass Boost Switch

TAPE PLAY

1. Check whether or not the tape is tight before it is inserted.

• To keep the tape from tangling, firmly wind the tape before inserting it into the player.

• Use of a cassette with more than 90 minutes, such as C-120 (120 minutes), is not recommended. The extreme thinness of this tape may damage this set.

2.Open the CASSETTE DOOR by hand, face the side to be played toward you, and insert the cassette tape. Close the

CASSETTE DOOR.

3.Connect the headphones to the jack and adjust the headphone band for proper fit.

4.Press the PLAY button.

5.Adjust the VOLUME to control the sound level you like.

6.To skip portions of the cassette tape, press the FAST FORWARD button.

7.To stop playing the cassette tape, press the STOP button, and the power source is also turned off.

(This set has a built-in auto-stop and the tape mechanism will stop playing and shut off when it reaches the end of the tape.)

8.To hear the other side of tape, flip it over and press PLAY.

TO HEAR THE SAME SONG AGAIN

1.Remove the tape, flip it around to the other side and insert it.

2.Press the FAST FORWARD button for a short time.

3.Remove tape, flip it around to the original side, reinsert and press PLAY.

BASS BOOST SWITCH

This switch enhances the low frequency (bass) sound at low listening levels. To suit your taste, switch the BASS BOOST switch to the right side, the red indicator appears inside the circle.

CLEANING TAPE HEAD If the sound drops out or excessive noise occurs, clean the magnetic head, capstan and pinch roller with a cotton

swab moistened with alcohol.

--- 3 ---IB-820M(B)-WM-E-050703