Lenoxx Electronics CD-104 manual Trouble Shooting, General, CD player Tape player Radio

TROUBLE SHOOTING

General

Problem	Remedy
The power is not on.	• Connect the AC power cord to a wall
	outlet securely.
	• Make sure the batteries are inserted
	correctly and they are fresh.
There is no sound.	• Make sure the FUNCTION switch is at the
	right position as you want.
	• Adjust the volume.

CD player

Tape player Radio

“	” appears in the display	• Insert the CD with the label side up.
even when a CD is in place.
		• Make sure that the CD compartment is
		•	closed.
			Place the CD with the label side up.
		•	Clean the CD.
CD does not play.		•	Take out the CD and leave the CD DOOR
			open for about an hour to dry moisture
			condensation.
		• Make sure the FUNCTION switch is at CD
			position.
		•	Clean the CD, or replace it if the CD is
The sound drops out.			badly damaged.
		• Place the player in a location free from
			vibration.
		• Check if your batteries are fresh.
The sound is weak or has		• Replace all the batteries with new ones if
			they are weak, or bring the set near a
poor quality.
			window, or rotate the set.
The RECORD button does		• Make sure the safety tab on the cassette
not function/The tape does			is in place.
		• Make sure the FUNCTION switch is at tape
not play.
			position.
The tape does not erase		• Clean the erasing head (see page 17).
completely.		•	Replace all the batteries with new ones
			if they are weak.
		• Make sure the tape is inserted properly.
The tape does not record.		•	Make sure the safety tab of the cassette
			is in place.
The	sound is weak/The	• Clean the heads, pinch roller and capstan
sound quality is poor.			(see page 17).
Cassette PLAY button pops		•	The tape has reached its end. Remove
up.			it, flip to the other side and re-insert.

18IB-CD104(TA)-FD-E-043002