Lenoxx Electronics CD-210 manual Troubleshooting

TROUBLESHOOTING

General

Problem	Remedy
The power is not on or the	• Connect the AC power cord to a wall
POWER indicator lamp is dim.	outlet securely.
	• Make sure the batteries are inserted
	correctly and they are fresh.
	• Make sure the appropriate indicator
There is no sound.	lamp is ON as you want.
	• Adjust the volume.
	• Unplug the headphones when listening
	through speakers.

CD player

Radio

Tape player

“	” flashes in the display	• Insert the CD with the label side up.
even when a CD is in place.
		• Make sure that the CD compartment is
		closed.
		• Place the CD with the label side up.
CD does not play.		• Clean the CD.
		• Take out the CD and leave the CD door
		open for about an hour to dry moisture

condensation.

• Make sure the CD indicator lamp is ON.

• Clean the CD, or replace it if the CD is badly damaged.

The sound drops out.• Place the player in a location free from vibration.

• Check if your batteries are fresh.

• Check if the CD itself is damaged by playing it in another set.

The sound is weak or has poor	• Replace all the batteries with new ones if
quality.	they are weak, or bring the set near a
	window, or rotate the set.
The RECORD button does not	• Make sure the safety tab on the cassette
function/The tape does not play.	is in place.
	• Make sure the TAPE indicator lamp is ON.
	• Make sure the tape is not at the end. Press
	REWIND then RECORD.
The tape does not erase	• Clean the erasing head (see page 18).
completely.	• Replace all the batteries with new ones if
	they are weak.
The tape does not record.	• Make sure the tape is inserted properly.
	• Make sure the safety tab of the cassette
	is in place.
The sound is weak/The sound	• Clean the heads, pinch roller and capstan
quality is poor.	(see page 18).
Cassette PLAY button pops up.	• The tape has reached its end. Remove it,
	flip to the other side and re-insert. Or
	press REWIND and PLAY to hear that side.

19