Trouble Shooting, General, CD player, Tape player

TROUBLE SHOOTING

The sound drops out.

The sound is weak/The sound

• Clean the heads, pinch roller and capstan.

quality is poor.

Cassette PLAY button pops up.

• The tape has reached its end. Remove it, flip to the

other side and re-insert.

IB-CD203(AD)-WM-E-012503

The power is not on.

There is no sound.

•Insert the AC plug into a wall outlet securely.

•Make sure the batteries are installed correctly and they are fresh.

•Make sure the FUNCTION switch is at the right position as you want.

•Adjust the volume.

•Unplug the headphones when listening through speakers.

“	” appears in the display even	• Insert the CD with the label side up.
when a CD is in place.


	• Make sure that the CD compartment is closed.
	• Clean the CD.
CD does not play.	• Take out the CD and leave the CD DOOR open for
	about an hour to dry moisture condensation.
	• Make sure the FUNCTION switch is at CD
	position.
	• Clean the CD, or replace it if the CD is badly

damaged.

• Place the player in a location free from vibration.

•Check if your batteries are fresh.

CD does not play while radio may •	It is normal since the radio uses less power than the
continue to play.	CD player.

The sound is weak or has poor • Replace all the batteries with new ones if they are

quality.weak, or bring the set near a window, or rotate the set.


	• Make sure the safety tab on the cassette is
The RECORD button does not	•	in place.
function/The tape does not play.		Make sure the FUNCTION switch is at TAPE
		position.

The tape does not erase	• Clean the erasing head.
completely.	• Replace all the batteries with new ones if they are
		weak.
The tape does not record.	• Make sure the tape is inserted properly.
	•	Make sure the safety tab of the cassette is in place.
	• Use only better quality tapes.
Tape jamming or tangling.	•	Do not use a cassette with more than 90 minutes.
	•	Make sure there are no loose layers of tape visible
		before inserting the cassette.