PLAYING CD TRACKS IN PROGRAMMED OR RANDOM ORDER
1. Programmed Play
You can make a program of up to 16 tracks in the order you want them to be played.
RANDOMBACKWARD
1.Rotate the FUNCTION switch to CD position. Make sure the CD is stopped.
2.Press the PROGRAM button. The letters “P0” will show and the PLAY/PROG. lamp will flash.
3.Press 
or 
to select the tracks you want to program in the order you want.
4.Press the PROGRAM button to confirm. The letters “P1” will show and the PLAY/PROG. lamp will flash.
5.Repeat above steps 3 and 4. You can program up to 16 tracks (the display will show “Pa”, “Pb” ...
“Pf” for
6.Press 
to start programmed play. The PLAY/ PROG. lamp will flash.
PLAY/
PROG.
REPEAT
PLAY/
PROG.
REPEAT
NOTE:
1.Programming can only be done in STOP mode.
2.The programmed memory will be lost if the STOP button is pressed, or the AC plug is shut off, or the CD door is opened.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button, then rotate the FUNCTION switch to TAPE position.
2. Random Play
To play the songs in random order
Press the RANDOM button, and the display will show some moving symbols
like “ 
... 
... 
” every 5 second. Press 
to skip to next random song.
To resume normal play
Press the RANDOM button again, the player will start play normally.
8
