5. Playing CD in programmed or random order
1. Programmed Play
You can make a program of up to 16 tracks in the order you want them to be played.
1. Slide the Function Switch to CD position, and Mode Switch to ON. Make sure the CD is stopped.
2.Press the Program Button. The letters “P1” will show and the Play/Program Lamp will flash.
3.Press 
or 
to select the tracks you want to program in the order you want.
4.Press the Program Button to confirm. The letters “P2” will show and the Play/Program Lamp will flash.
5.Repeat steps 3 and 4. You can program up to 16 tracks (Display will show “P0” for program#10, and “Pa”, “Pb” ... “Pf” for
6.Press 
to start program play. The Play/Program Lamp will remain flashing.
Program/Repeat Random
P L AY/ P R OG .
P L AY / P RO G.
To change the current program
Just create a new program following the Programming procedure.
To cancel Program Play
Press the Stop Button and the Program Lamp goes off.
Programmed memory will be lost
When the Function Switch is moved to the OFF or RADIO position, or the CD door is opened.
2.Random Play
To play the songs in random order
Press the CD Random Button, and the display will show some moving symbols like
“
... 
... 
” every 5 second. The set will play songs in random order. Press 
to skip to the next random song.
To resume normal play
Press the CD Random button again.
