DESK USE / WALL MOUNTING
Note: For either desk use or wall mounting, you need to install the included adaptor.
If you do not have a modular wall phone plate installed, please consult with your phone company or installer to get one, or see next page for installation without a wall plate.
1.HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must be adjusted so it will hold the HANDSET.
A. SLIDE OUT | B. REVERSE | C. REPLACE INTO PHONE |
2.Both to use as a desk phone and as a wall phone, you must use the plastic (box shape)
WALL MOUNT ADAPTOR.
FOR DESK USE,
PUT ADAPTOR
HERE
FOR WALL USE,
PUT ADAPTOR
HERE
3. Use the SHORT STRAIGHT WALL CORD, and plug one end into the rear of the phone. Route the cord into the channel at the phone back.
4. Plug the other end of the SHORT STRAIGHT WALL CORD into the WALL JACK.
5.Put the phone over the WALL PLATE, make sure both posts fit into slots on the back of the phone. Then slide the phone down to lock the phone onto the WALL PLATE.
14IB-PH5595-WM-E-032704
16 | 4/8/2004, 3:17 PM |
