CLOCK SETTING
3&5
NOTE: If the POWER switch is ON and you want to set the time, press the TAPE switch first, and then
2,4&6follow the listed steps to set the clock.
Connect the AC power cord (see page 3).
1 | Once the set is connected with the |
| ||
AC power, the display will show as |
| |||
|
| |||
| right: |
|
| AM |
|
|
|
| |
|
|
|
| HOUR MINUTE |
2 | Press | the PROGRAM(STORE) |
| |
switch, the hour digits will flash for |
| |||
| 10 seconds. |
| AM | |
3 | Press | the | TIME/TUNING |
|
switches to | select the correct |
| ||
| hour time. Observe the AM & PM | AM | ||
| indicators, advance the time 12 |
| ||
4 | hours to change AM to PM. |
| ||
Press | the PROGRAM(STORE) |
| ||
| switch to accept the hour time and | AM | ||
5 | switch to minute setting. |
| ||
Press | the | TIME/TUNING |
| |
|
| |||
| switches to | select the correct | AM | |
| minute time. |
|
| |
Press the PROGRAM(STORE)
6 
switch again to complete clock setting. The numbers will not flash, but the colon “ : ” will flash, indicating that the clock is set.
AM
5
