27
¾ Acceptable Frame type: It matches that Ingress Filtering Rule 2 on web.
Drop untagged frame. Press “Space” key to select drop or forward the
untagged frame.
3. Select
<Save> to save the configuration.
VLAN Configure interface
Create VLAN Group
Create Port-Based VLAN
1. Select
<Edit>.
2. VLAN Name: Type a name for the new VLAN, ex: VLAN01.
3. Group ID: Type the VLAN group ID. The group ID rang is from 1 to 4094.
4. Member: Press ”Space” key to change the member value. There are two types to
selected:
a. Member: the port is a member port.
b. NO: it means that port is NOT a member port.
5. Press
“ESC” key to go back action menu line.
6. Select
<Save> to save the configuration.
NOTE: If you had configured the trunk groups, you can see it (ex: Trunk1,
Trunk2…) in the port list. You also can configure the trunk group as the VLAN
member.