KVM-0850/1650 IP KVM switch
Figure 6-19. Network Settings
Warning
The initial IP configuration is usually done directly at the host system using the
special procedure described in Table 4-1.
Warning
Changing the network settings of the KVM-0850/1650 might result in losing
connection to it. In case you change the settings remotely make sure that all the
values are correct and you still have an option to access the KVM-0850/1650.
IP auto configuration
With this option you can control if the KVM-0850/1650 should fetch its network settings
from a DHCP or BOOTP server. For DHCP, select “dhcp” , and for BOOTP select “bootp”
accordingly. If you choose“none” then IP auto configuration is disabled.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the KVM-0850/1650 should be accessible from networks other than the local one,
this IP address must be set to the local network router's IP address.
60