LevelOne KVM-9000 user manual Options

Models: KVM-9000

1 74
Download 74 pages 17.25 Kb
Page 44
Image 44

Port: This is a fixed number “443”.

Warning

Please be cautious that if “Allow Write Support” is selected, all data on the shred media

might be destroyed.

Device Authentication

The factory default Username is “super” and the default Password is “pass”. Click Ok, the new device icon will be changed as below,

Figure 5-21. Drive Redirection finished

Warning

1.Drive Redirection is only possible with Windows 2000 and the latter version.

2.The Drive Redirection works on a low SCSI level and the SCSI protocol cannot recognize partitions; therefore the whole drive selected will be shared instead of any particular partition.

3.While connecting to a legacy KVM switch, please select PS/2 mouse for Keyboard/Mouse setting from webpage. Otherwise you will be not be able to use Hot-key.

6.2.4Options

Options

Figure 6-5. USB mass storage option

Set this option to disable the mass storage emulation (and hide the virtual drive) if no image file is currently loaded. If unset, and no file image will be found it may happen that the host system will hang on boot due to changes in the boot order, or the boot manager (LILO, GRUB). This case was reported for some Windows versions (2000, XP), other OS might not be fully excluded. This behavior depends on the BIOS version used in that machine.

To set this option, press the button “Apply”.

40

Page 44
Image 44
LevelOne KVM-9000 user manual Options