24
4.3.2.3 IP over ATM (RFC 1483 Routed):
In the Router Mode, NAT is always enabled. You have to set the following WAN IP settings:
WAN IP Mode:
This product supports two WAN IP modes: static and dynamic. If you select dynamic mode, it will try
to get a legal IP and WAN settings from ISP’s DHCP server. If you select static mode, you have to set
the following WAN setting manually.
WAN IP Address, WAN Subnet Mask, WAN Gateway, and Primary/Secondary
DNS
These settings are assigned by your ISP.
WAN’s MAC Address:
You can click the Clone MAC button to copy the MAC address of your PC and set it to be the MAC
address of this device.