9
2.1.2. Rear Panel
Figure 2-2 Rear Panel
Ports:
Port Description
5VDC Power inlet: DC 5V, 2.5A (minimum)
WAN The port where you will connect your phone jack.
Port 1-4 The ports where you will connect networked computers and other
devices.
PRINTER Printer Port
RESET To reset system settings to factory defaults, please follow the steps:
1. Power off the device,
2. Press the reset button and hold,
3. Power on the device,
4. Keep the button pressed and watch the M1 LED, when they flash 8
times then release the reset button.
1. Decide where to place your Wireless Broadband Router
LevelOne WBR-2401 can be placed on a desk or other flat surface, or you can mount it on a wall.
For optimal performance, place your Wireless ADSL Broadband Router in the center of your office
(or your home) in a location that is away from any potential source of interference, such as a metal
wall or microwave oven. This location must be close to power and network connection.
2. Setup LAN connection
a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one
of the LAN ports of this product.
b. Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.