Configuring LevelOne WBR-3404TX, Start-up and Log | LevelOne

Chapter 4 Configuring LevelOne WBR-3404TX

WBR-3404TX provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms.

4.1 Start-up and Log in

Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE) field and press ENTER. For example: http://192.168.123.254.

After the connection is established, you will see the web user interface of this product. There are two appearances of web user interface: for general users and for system administrator.

To log in as an administrator, enter the system password (the factory setting is ”admin”) in the System Password field and click on the Log in button. If the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main menu, there are several options for system administration.

17

Image 17

LevelOne user manual Configuring LevelOne WBR-3404TX, Start-up and Log

Contents

LevelOne Trademarks Copyright CE Declaration of Conformity FCC Interference Statement Table of Contents Firmware Upgrade Functions and Features Virtual Server supported Universal Plug and Play UPnP supportedUser-Definable Application Sensing Tunnel DMZ Host supported Panel Layout Packing List802.1X supported Front Panel USB Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Setup WAN connection Setup LAN connectionConnecting this product with your printer Power on Install the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3404TX Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP Address Pptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Encryption Key Length 802.1XRadius Server Radius Shared Key Change Password Forwarding Rules Virtual Server Special AP Miscellaneous Items UPnP SettingIP Address of DMZ Host Non-standard FTP port Security Settings Packet Filter Example Inbound Filter They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control IP Address Control tableMAC Address ∙ Max. number of tunnels item VPN setting∙ Tunnel name ∙ Method Function of Buttons ∙VPN Settings IKEBasic setup Local subnet Remote subnet Local netmaskRemote netmask Remote gateway ∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting Get Date and Time by NTP Protocol System TimeTime Server Time Zone System Log Mail Alert EnableIP Address for Syslog Smtp Server IP and Port Mail Subject Dynamic DNS Example Enable Snmp Snmp SettingGet Community Set CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default Domain Name or IP address for Ping Test MAC Address for Wake-on-LAN Print Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98 Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page