LevelOne WBR-3404TX manual

3.Select “Standard TCP/IP Port”, and then click “New Port…”

4.Click Next and then provide the following information:

Type address of server providing LPD that is our NAT device:192.168.123.254

75

Image 75

LevelOne WBR-3404TX user manual

Contents

LevelOne Trademarks Copyright CE Declaration of Conformity FCC Interference Statement Table of Contents Firmware Upgrade Functions and Features DMZ Host supported Universal Plug and Play UPnP supportedVirtual Server supported User-Definable Application Sensing Tunnel Front Panel Packing ListPanel Layout 802.1X supported USB Reset Procedure for Hardware Installation Decide where to place your Wireless Broadband RouterRear Panel Power on Setup LAN connectionSetup WAN connection Connecting this product with your printer Install the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3404TX Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP Address Pptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Radius Shared Key 802.1XEncryption Key Length Radius Server Change Password Forwarding Rules Virtual Server Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ Host Security Settings Packet Filter Example Inbound Filter They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control Control table MAC AddressIP Address ∙ Method VPN setting∙ Max. number of tunnels item ∙ Tunnel name ∙VPN Settings IKE Basic setup Local subnetFunction of Buttons Remote gateway Local netmaskRemote subnet Remote netmask ∙VPN Settings Set IKE Proposal ∙VPN Settings -Set IPSec Proposal IPSec Proposal indexEncapsulation protocol IPSec proposal Remote Administrator Host/Port Administrator Time-outDiscard Ping from WAN side Advanced Setting Time Zone System TimeGet Date and Time by NTP Protocol Time Server Smtp Server IP and Port Mail Alert EnableSystem Log IP Address for Syslog Mail Subject Dynamic DNS Example Set Community Snmp SettingEnable Snmp Get CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Backup Setting Reset to defaultReboot Domain Name or IP address for Ping Test MAC Address for Wake-on-LAN Print Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98 Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page