3.3.1 Setting
•Operating Mode:
If you want to connect to an Access Point, please set the mode as ”Infrastructure”. If you have more stations and just want to set them as a local network, please set the Mode as ” 802.11 Ad Hoc”.
•Channel:
It shows the radio channel number that is used for networking. The Channel number must be the same among stations, so that computers can communicate within the local LAN. It can be changed only under the 802.11 Ad Hoc Mode. If the Mode is Infrastructure, this parameter will not be active.
•SSID:
SSID is the group name shared by every member of your wireless network .You will only be able to connect with an Access Point (AP), which has the same SSID. Please note that the SSID will be case sensitive. Please note that when you are in the 802.11
•Tx Rate:
The USB Adapter supports 4 transmission rates: 1Mbps, 2Mbps, 5.5Mbps, and 11Mbps. You may set the TX rate manually, or select the “Fully Auto” mode to let it run at the most proper rate automatically.
28
