•MAC Address:
It displays the MAC address of your IEEE802.11b USB device, and the parameter cannot be changed.
•Other information:
The Signal Strength and Link Quality will be shown in the screen below under the Status of your USB adapter,
•Status:
If you set the operation mode as “802.11 Ad Hoc“, the Status column will show the “OK” while the link quality is fine. If you set the operation mode as “Infrastructure”, the Status column will show the BSSID of the AP that you are associating with.
If you would like to change the parameter(s) of the “Sett ing”, please follow the steps as follows:
1.Click the “Change”button first.
2.Choose the parameter(s) you wish to change.
3.After changing the parameter(s), please click on the “Submit” button to finish.
29
