How should I set the Cat.No.AESS5 speakers for Dolby Digital or DTS home theater systems?

Ensure all speakers are set to Small.

What should I do if a problem occurs with the loudspeaker?

Check all connections, reverse the connection wires, and refer to the Troubleshooting section for additional information.

How often should I clean the satellite enclosure?

Clean periodically depending on metals involved in connections, atmospheric conditions, and other factors, but at least once a year.

Operation, Maintenance And Service, Surround Modes

OPERATION

Surround Modes:

When using the system in a Dolby* Digital or DTS® home theater system, ensure that all Cat. No. AESS5 speakers are set to “Small”.

When using the Cat. No. AESS5 in a Dolby Pro Logic* home theater system, ensure that the receiver's center channel mode is set to “Normal”.

Some Dolby Digital-equipped receivers/processors offer different setup options for each source or surround mode, e.g., Cd-Stereo, Videotape, Dolby, Pro Logic. In each case, follow your equipment's instructions to ensure that the subwoofer output is turned ON and the speakers are set to “Small” in each mode.

MAINTENANCE AND SERVICE

The satellite enclosure may be cleaned using a soft cloth to remove ﬁngerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loudspeaker. If the problem appears in the opposite speaker, the cause is in another component or cable.

Refer to the Troubleshooting section for additional information.

Leviton AESS5 manual Operation, Maintenance And Service, Surround Modes

Models: AESS5