Manuals / Leviton / Home Audio / Speaker

Leviton AESS5 manual Troubleshooting, If There Is No Sound From Any Of The Speakers

Models: AESS5

1 13
Download 13 pages 24.9 Kb
Page 8
Image 8
TROUBLESHOOTING

TROUBLESHOOTING

IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:

•Check that receiver/amplifier is on and a source is playing.

•Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching each other.

•Review proper operation of your receiver/amplifier.

IF THERE IS NO SOUND COMING FROM ONE SPEAKER:

•Check the “Balance” control on your receiver/amplifier.

•Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching each other.

IF THERE IS LOW (OR NO) BASS OUTPUT:

•Make sure the connections to the left and right “Speaker Inputs” have the correct polarity (+ and –).

•Consider adding a powered subwoofer to your system.

•In Dolby Digital or DTS modes, make sure your receiver/processor is correctly configured. When using a subwoofer, make sure the subwoofer output of the receiver/ processor has been enabled. If no subwoofer is being used, make sure the left and right front and rear speakers have been configured as “LARGE.” See your receiver/ processorʼs ownerʼs manual for further information on correct speaker configuration in Dolby Digital, DTS and other surround sound modes.

IF THE SYSTEM PLAYS AT LOW VOLUMES BUT SHUTS OFF AS VOLUME IS INCREASED:

•Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut , punctured or touching each other.

•If more than one pair of main speakers is being used, check the minimum-impedance requirements of your receiver/amplifier.

8

Page 7 Page 9
Page 8
Image 8
Leviton AESS5 Troubleshooting, If There Is No Sound From Any Of The Speakers, If There Is No Sound Coming From One Speaker
Page 7 Page 9

FAQ

Why is there no sound from any of the speakers?

Check that the receiver/amplifier is on and a source is playing. Verify all wires and connections are secure and none are frayed, cut, or touching.

What should I do if there is no sound coming from one speaker?

Check the Balance control on your receiver/amplifier. Ensure all wires and connections are secure and none are frayed, cut, or touching.

How can I improve low bass output?

Check the polarity of the speaker inputs and consider adding a powered subwoofer to your system. Make sure the receiver/processor is correctly configured for Dolby Digital or DTS modes.